MM32F5280
- Overview
- Document
- Tools & Software
- Target Application
- Selection
- Product Information
Product Description
MM32F5280 is the MCU equipped with Arm China STAR-MC1 core. It operates at a frequency of up to 120MHz, embeds up to 2.25MB Flash and 192KB RAM, equips with algorithm acceleration units such as Floating Point Unit (FPU), Digital Signal Processing (DSP), signal-to-signal interconnected matrix MindSwitch, Configurable Logic Unit (CLU) and trigonometric function acceleration unit (CORDIC) and integrates with rich peripheral modules and I/O ports. Compared with the existing products, MM32F5280 is designed to be used in a wide range of industrial, automotive and IoT applications with improved performance, memory capacity, bus architecture and peripheral configuration.
- This device, based on Arm China STAR-MC1 processor and Armv8-M Mainline Instruction Set Architecture,integrates with FPU and DSP. Its unit frequency CoreMark is approximately 20% higher than that of Cortex-M3 and Cortex-M4
- 4KB L1 I-Cache and 4KB L1 D-Cache
- Up to 2.25MB built-in Flash
- Up to 192KB built-in RAM (including 32KB ITCM, 32KB DTCM and 128KB System RAM)
- Embed FSMC parallel memory interfaces
- Two 12-bit SAR ADCs with sampling rate up to 3MSPS, equip with up to 21 external channels and support up to 256 times hardware oversampling
- Two 12-bit DACs and three comparators
- Seven 16-bit timers and two 32-bit timers
- Eight UART interfaces (including one LPUART), three SPI interfaces, three I2S interfaces and two I2C interfaces
- One USB OTG full-speed interface
- Two FlexCAN interfaces
- Some models equip with 10M/100M Ethernet controllers
- Supported temperature range: -40℃~105℃
- Provide LQFP144, LQFP100 and LQFP64 package types
MM32F5280 can be used in the following fields:
- Industry control
- Elevator control
- Firefighting control
- Transportation
- Printer
- Scanner
- Home appliance control
- Motor control
- Floor sweeper
Product Features
Related Videos
-
MindMotion High-performance MM32F5 series MCU product introduction
Arm China STAR-MC1 core
Armv8-M Mainline Instruction Set Architecture
4.02 CoreMark/MHz, integrates with FPU and DSP -
PLUS-F5270 unpacking and downloading MindSDK GPIO demo program
Out-of-the-box demo video of PLUS-F5270 based on MM32F5270
Leaflet
-
MM32F5 Leaflet: New core, New Architecture, "STAR" Platform (Chinese)
Chinese 1.00 PDF 3.03MB 2022.06.08Description: Introduct the main features, functions, advantages, ordering information and development tools support of related products or series.
-
MM32F5 Leaflet: New core, New Architecture, "STAR" Platform (English)
English 1.00 PDF 2.93MB 2022.06.08Description: Introduct the main features, functions, advantages, ordering information and development tools support of related products or series.
Data Sheet
-
MM32F5280 Datasheet (Chinese)
Chinese 0.6 PDF 3.53MB 2022.10.24Description: Supports MM32F5280 series, provide detailed specifications, pin definition, electrical characteristics and packaging information.
-
MM32F5280 Datasheet (English)
English 0.6 PDF 3.36MB 2022.10.24Description: Supports MM32F5280 series, provide detailed specifications, pin definition, electrical characteristics and packaging information.
User Manual
-
MM32F5280 User Manual (Chinese)
Chinese 0.9 PDF 49.12MB 2024.01.26Description: Supports MM32F5280 series, providing a complete system architecture, memory and all peripheral details and register descriptions.
-
MM32F5280 User Manual (English)
English 0.9 PDF 38.87MB 2024.01.26Description: Supports MM32F5280 series, providing a complete system architecture, memory and all peripheral details and register descriptions.
Errata Sheet
-
MM32F5280 Errata Sheet (Chinese)
Chinese 0.9 PDF 152.29KB 2023.02.02Description: Supports the MM32F5280 series, list the known issues and provide recommended solutions.
-
MM32F5280 Errata Sheet (English)
English 0.9 PDF 126.49KB 2023.02.02Description: Supports the MM32F5280 series, list the known issues and provide recommended solutions.
Application Note
-
AN0006 programmer supported by third party (Chinese)
Chinese 2.4 PDF 362.93KB 2023.09.26Description: Third-party tools for programming MM32 products
-
AN0006 programmer supported by third party (English)
English 2.4 PDF 378.25KB 2023.09.26Description: Third-party tools for programming MM32 products
-
AN0001 MDK5.18 Installation Guide (Chinese)
Chinese 1.3 PDF 337.74KB 2022.03.15Description: MDK5.18 installation guide, a brief introduction to the establishment of a MM32 chip project.
-
AN0005 setting the chip to factory (Chinese)
Chinese 1.4 ZIP 175.64KB 2022.03.15Description: MM32 series chip restore the factory settings
-
AN0012 Installation of MM32 Series Keil pack (Chinese)
Chinese 1 PDF 745.44KB 2022.03.15Description: MM32 Series Keil pack installation method
-
AN0016 Use J-Flash to program the MM32 (Chinese)
Chinese 1 PDF 1.69MB 2022.03.15Description: Brief for Using J-Flash to program MM32 chip
Lib Samples
-
MM32F5280 Lib Samples
English 1.1.2 ZIP 4.96MB 2024.01.22Description: Supports MM32F5280 and the Cortex-M Microcontroller Software Interface Standard (CMSIS), MM32 Standard Peripheral Library, IAR and MDK development, and offer rich reference samples for library function and register operations.
Recommended Tools
-
MiniBoard-OB (MM32F5287L7PV)
On-board main control: MM32F5287L7PV
- 32bit Arm China STAR-MC1
- 2.25MB Flash, 192KB SRAM
- LQFP64On-board resources:
- MM32LINK-OB V1.0 emulator
- 2 user LEDs
- 2 user press keys
- 1 reset key
- 1 adjustable potentiometer
- 8M SPI FLASH
- 2K EEPROM
- CAN transceiverOn-board interface:
- 2 x USB Type-C (USB-DBG 和 USB-MCU)
- 2x5P 1.27mm external emulator interface
- MM32F5287L7P full-pin expansion connector
- CAN connectorPower supply:
- USB TYPE-C -
MM32-LINK MINI Emulator
Support MM32 MCU SWD programming and debugging, compatible with CMSIS-DAP debugging channel
Support CDC virtual serial port, baud rate support 9600 / 14400 / 19200 / 28800 / 38400 / 56000 / 57600 / 115200 etc
Support firmware update and function configuration via U-Disk
Driver-free installation, supports Windows and Linux operating systems
Recommended Software
-
IAR Pack
When using IAR integrated development environment to develop MM32 microcontroller, you need to install this support package, so that you can select MM32 chip model, debug and download in IAR. -
KEIL Pack
When using KEIL integrated development environment to develop MM32 microcontroller, you need to install this support package, so that you can select MM32 chip model, debug and download in KEIL. -
J-Link Pack
When using J-Link debuggerto debug MM32 microcontroller or using J-Flash to make programming, this supportpackage needs to be installed to realize the selection of MM32 device in J-Flash; When J-Li...
Target Application
-
No Details
Selection
Buy
Part No.
Core
Max Speed (MHz)
Flash (KB)
RAM (KB)
I/O#
Advanced TMR
GP TMR
UART
LPUART
I²C
SPI
USB 2.0 FS
CAN 2.0B
Ethernet
ADC (1Msps, 12bit)
ADC (3Msps, 12bit)
DAC (12bit)
ACMP
OpAmp
Pin Counts
Package
Package Size
Operation Temp
-
样片申请Agent Channel Link
- MM32F5287L7PV
- STAR-MC1
- 120
- 2304
- 192
- 54
- 2
- 6
- 7
- 1
- 2
- 3
- D/H/O
- 2
- 1
- -
- 2, 16ch
- 2
- 3
- -
- 64
- LQFP
- 10x10
- -40~105C
-
样片申请Agent Channel Link
- MM32F5287L8PV
- STAR-MC1
- 120
- 2304
- 192
- 86
- 2
- 6
- 7
- 1
- 2
- 3
- D/H/O
- 2
- 1
- -
- 2, 19ch
- 2
- 3
- -
- 100
- LQFP
- 14x14
- -40~105C
-
样片申请Agent Channel Link
- MM32F5287L9PV
- STAR-MC1
- 120
- 2304
- 192
- 112
- 2
- 6
- 7
- 1
- 2
- 3
- D/H/O
- 2
- 1
- -
- 2, 21ch
- 2
- 3
- -
- 144
- LQFP
- 20x20
- -40~105C
You have not logged in yet, please log in and apply again, thank you!
Sample Application
We offer the following online ordering options
MM32F0010
Home > 产品 > MM32F > MM32F Value Line > MM32F0010
- Dealer
- Stock*
- Unit Price
- Quantity
- 1548
- $5.25
- 50
- Americas (inventory)
- EMEA(inventory)
- Asia(inventory)
- Japan(inventory)
- Dealer
- Stock*
- 1548
-
Order Now
- 1548
-
Order Now
- 1548
-
Order Now
- 1548
-
Order Now