Products
Products
MM32SPIN060G
- Overview
- Document
- Tools & Software
- Target Application
- Selection
- Product Information
Product Description
MM32SPIN060G is a high-performance single motor control SOC product under the dynamic MindSPIN brand. It adopts Cortex-M0 core and integrates dedicated analog peripherals required for motion control, including a 12-bit high-precision ADC, 2 channels of analog comparators (COMP), 2 channels of operational amplifiers (OPAMP), and a three-phase N-channel gate driver. It is also equipped with dedicated resources such as MC-TIM, hardware divider (HW-Div), DMA controller, as well as 32KB Flash, 4KB SRAM, and 11 GPIOs as basic resources.
- Storage and computation resources: 32KB Flash, 4KB SRAM, maximum frequency of 60MHz
- 7 timer resources: 1 advanced 16-bit timer, 1 32-bit general-purpose timer, 3 basic timers, 1 12-bit IWDG, 1 24-bit SysTick
- Supports 2-channel DMA
- Hardware divider (HW-Div)
- 1 channel 12-bit analog-to-digital converter (ADC), supports 7 channels, sampling rate of 1Msps
- 2 channels of analog comparators (COMP), 2 channels of rail-to-rail operational amplifiers (OPAMP)
- Three-phase N-channel gate driver
- Supports UART/SPI communication
- Internal LDO supports operating range of 5.5~18V
- Pre-drive operating voltage up to 100V
- Supports four-wire burning function
- Operating environment temperature -40°C~105°C
- Available in QFN32 4mmx4mm package
Suitable for various applications:
- Server fans
- Pump
- Fan
- PWM communication control motor applications
Product Features
Related Videos
-
No Details
Data Sheet
-
MM32SPIN060G Datasheet (Chinese)
Chinese 0.3 PDF 1.89MB 2024.07.01Description: Supports MM32SPIN060G series, provide detailed specifications, pin definition, electrical characteristics and packaging information.
Application Note
-
AN0001 MDK5.18 Installation Guide (Chinese)
Chinese 1.3 PDF 337.74KB 2023.08.18Description: MDK5.18 installation guide, a brief introduction to the establishment of a MM32 chip project.
-
AN0005 setting the chip to factory (Chinese)
Chinese 1.4 ZIP 175.64KB 2023.08.18Description: MM32 series chip restore the factory settings
-
AN0006 programmer supported by third party (Chinese)
Chinese 2.4 PDF 2023.09.26Description: Third-party tools for programming MM32 products
-
AN0006 programmer supported by third party (English)
English 2.4 PDF 2023.09.26Description: Third-party tools for programming MM32 products
-
AN0012 Installation of MM32 Series Keil pack (Chinese)
Chinese 1.0 PDF 745.44KB 2023.08.18Description: MM32 Series Keil pack installation method
-
AN0016 Use J-Flash to program the MM32 (Chinese)
Chinese 1.0 PDF 1.69MB 2023.08.18Description: Brief for Using J-Flash to program MM32 chip
-
AN6405 MM32SPIN First step
Chinese 1.0 ZIP 1.51MB 2023.08.18Description: MM32SPIN First step
-
AN6301_Sensorless Trapezoidal Control of BLDCM (Chinese)
Chinese 1.0 PDF 1.76MB 2023.08.18Description: Sensorless Trapezoidal Control of BLDCM
-
AN6303 PMSM control principle (Chinese)
Chinese 1.0 PDF 813.50KB 2023.08.18Description: PMSM control principle Introducion
Lib Samples
-
SPIN Series PCB&SCH library for Altium
English 1.11 ZIP 63.66KB 2024.09.09Description: SPIN Series PCB&SCH library for Altium
-
MM32SPIN060G Lib Samples
English 1.3.6 ZIP 3.19MB 2024.08.22Description: MM32SPIN060G series, which integrates MM32SPIN0230 series. This link will redirect to the MM32SPIN0230 Lib Samples.
Recommended Tools
-
Motor-DK (MM32SPIN060G)
VDC input: 5.5V~18V(recommended value 12V)
MCU built-in 100V 6N pre-driver, 5.0V LDO(50mA) and two OPA
60V40A NMOS on-board
Support HALL(capture) and BEMF(ADC) detect switching
Support OCP using internal COMP
Support motor start&stop control using potentiometer
Support program debug using VIN/FG/PWM/GND
Support four-wire programming function
-
MM32-LINK MINI Emulator
Support MM32 MCU SWD programming and debugging, compatible with CMSIS-DAP debugging channel
Support CDC virtual serial port, baud rate support 9600 / 14400 / 19200 / 28800 / 38400 / 56000 / 57600 / 115200 etc
Support firmware update and function configuration via U-Disk
Driver-free installation, supports Windows and Linux operating systems
Recommended Software
-
IAR Pack
When using IAR integrated development environment to develop MM32 microcontroller, you need to install this support package, so that you can select MM32 chip model, debug and download in IAR. -
KEIL Pack
When using KEIL integrated development environment to develop MM32 microcontroller, you need to install this support package, so that you can select MM32 chip model, debug and download in KEIL. -
J-Link Pack
When using J-Link debuggerto debug MM32 microcontroller or using J-Flash to make programming, this supportpackage needs to be installed to realize the selection of MM32 device in J-Flash; When J-Li...
Target Application
-
No Details
Selection
Buy
Part No.
Core
Max Speed (MHz)
Flash (KB)
RAM (KB)
Backup RAM(KB)
Ext. Bus I/F
I/O#
Security
32bit DIV
Advanced TMR
GP TMR
LP TMR
WDG
RTC
U(S)ART
LPUART
I²C
I³C
SPI
I²S
USB 2.0 FS
USB 2.0 HS
CAN 2.0B
Ethernet
SDIO
QSPI
ADC (1Msps, 12bit)
ADC (3Msps, 12bit)
DAC (12bit)
ACMP
OpAmp
Segment LCD
Pin Counts
Package
Package Size
Operation Temp
-
样片申请Agent Channel Link
- MM32SPIN060G
- M0
- 60
- 32
- 4
- -
- -
- 11
- -
- 1
- 1
- 4
- -
- 1
- -
- 1
- -
- -
- -
- 1
- -
- -
- -
- -
- -
- -
- -
- 10ch
- -
- -
- 2
- 2
- -
- 32
- QFN
- 4X4
- -40~105C
You have not logged in yet, please log in and apply again, thank you!
Sample Application
We offer the following online ordering options
MM32F0010
Home > 产品 > MM32F > MM32F Value Line > MM32F0010
- Dealer
- Stock*
- Unit Price
- Quantity
- 1548
- $5.25
- 50
- Americas (inventory)
- EMEA(inventory)
- Asia(inventory)
- Japan(inventory)
- Dealer
- Stock*
- 1548
-
Order Now
- 1548
-
Order Now
- 1548
-
Order Now
- 1548
-
Order Now