Login
Support
Support
eMiniBoard
Support MM32 Cortex-M series MCU development evaluation
Support an integrated development environment of KEIL uVision v5.0, IAR EWARM v7.80 and above
Support MM32 FDS firmware development platform
Support MM32 Program programming software
Supply power for the development board MCU is based on 3.3V voltage design
Support up to 4KV EFT anti-jamming ability
Embed MM32-LINK-OB in-circuit emulator to support SWD debug interface and CDC virtual com port (which is connected via smart technology)
The label, position and function of the common components on all development boards are uniformly designed
Power supply for emulator USB interface or targeted MCU USB interface
Four side buttons
Four LEDs
One UART adapter
One USB (optional）adapter
One CAN (optional) adapter, CAN driver and terminal matching resistor switch
One 16Mbit SPI Flash memory
One 2Kbit I2C EEPROM memory
One passive speaker
One 3-analog input potentiometer
One switch for built-in extensive function and MCU pin function selection
0.1-inch-spacing DIP socket with the same pin as the MCU (some functional pins are not drawn)
Compatible with Arduino interface, PCB size 3.0x2.85 inches
Blue, black and white PCB and surface mounting technology design can quickly distinguish the functions of the development board
Evaluation Development Board
- EVK type number MCU on board
- eMini-F0010 eMiniBoard (MM32F0010A1T)
- eMini-F0130 eMiniBoard (MM32F0133C7P)
Related Video
